Help Docs

Azure Virtual Network Gateway Monitoring Integration

Azure VPN gateway monitoring is vital for ensuring that your gateways are healthy and performing as expected. By monitoring your gateways, you can identify and troubleshoot problems early, before they impact your network connectivity. With Site24x7, you can proactively monitor Virtual Network gateways, set thresholds, and get instant alerts for critical issues like Tunnel failure, and BGP routes problems.

With Site24x7's integration, you can now monitor your virtual network gateways, set thresholds, and get instant alerts about critical issues.

Setup and configuration

You can add an Azure Virtual Network gateway while adding a new monitor or you can add it to an existing Azure monitor. Follow these steps to add the service.

Supported metrics

The following metrics are collected:

Metric nameDescriptionStatisticUnit
Gateway S2S Bandwidth The site-to-site bandwidth of a gateway Average Bytes per second
Gateway P2S Bandwidth The point-to-site bandwidth of a gateway Average Bytes per second
P2S Connection Count The point-to-site connection count of a gateway Total Count
Tunnel Bandwidth The average bandwidth of a tunnel Average Bytes per second
Tunnel Egress Bytes The outgoing bytes of a tunnel Total Bytes
Tunnel Egress TS Mismatch Packet Drop The outgoing packet drop count from traffic selector mismatch of a tunnel Total Count
Tunnel Egress Packets The outgoing packet count of a tunnel Total Count
Tunnel Ingress Bytes The incoming bytes of a tunnel Total Bytes
Tunnel Ingress TS Mismatch Packet Drop The incoming packet drop count from traffic selector mismatch of a tunnel Total Count
Tunnel Ingress Packets The incoming packet count of a tunnel Total Count
VNet Address Prefix The total number of address prefixes that can be used by the gateway Sum Count
User VPN Route The direct traffic from the VPN clients to specific destinations Sum Count
Tunnel MMSA The number of MMSAs getting created or deleted Sum Count
Tunnel QMSA The number of IPSEC QMSAs getting created or deleted Sum Count
Tunnel Total Flow The total number of active flows or sessions that have been established on a tunnel interface in a networking environment Sum Count
Tunnel Egress Packets Drop The total number of packets that have been dropped at the egress point (exit point) of a tunnel Sum Count
Tunnel Ingress Packets Drop The total number of packets that have been dropped at the ingress point (entry point) of a tunnel Sum Count
Tunnel NAT Allocations The number of Network Address Translation (NAT) entries for packets that traverse a tunnel Sum Count
Tunnel NAT Flow The number of active Network Address Translation (NAT) flows that are being managed for packets traversing a tunnel Sum Count
Tunnel NATed The total number of bytes that have been subjected to Network Address Translation (NAT) while traversing a tunnel Sum Count
Tunnel NATed Packets The total number of packets that have undergone Network Address Translation (NAT) while traversing a tunnel Sum Count
Tunnel NAT Packet Drops The number of Tunnel Network Address Translation (NAT) Packet Drops Sum Count
Tunnel Peak PPS The highest number of packets per second (PPS) observed or experienced on a tunnel interface Average Count
BGP Peer Status The current state of the BGP peering relationship between two BGP routers Average Count
BGP Routes Learned The number of BGP routes learned from peer Sum Count
BGP Routes Advertised The number of BGP routes advertised to its BGP peers Sum Count

Threshold configuration

Global configuration

  • Go to the Admin section in the left navigation pane.
  • Select Configuration Profiles from the left pane and choose the Threshold and Availability (+) tab from the drop-down menu. Click Add Threshold Profile from the top-right corner.
  • Set the monitor type as Azure Virtual Network Gateway. Now you can set the threshold values for all the metrics mentioned above.

Monitor-level configuration

  • Go to Cloud > Azure and select Azure Virtual Network Gateway from the drop-down menu.
  • Choose a resource for which you would like to set a threshold, then click the hamburger icon . Select Edit, which directs you to the Edit Azure Virtual Network Gateway Monitor page.

You can set the threshold values for the metrics by selecting Threshold and Availability. You can also configure IT Automation at the attribute level.

IT Automation

Site24x7's IT Automation tools help with automatically resolving performance degradation issues. When a breach occurs, the alarm engine continuously examines the system events for which thresholds have been defined and performs the mapped automation.

How to configure IT Automation for a monitor

Configuration Rules

With Site24x7's Configuration Rules, you can set parameters like Threshold Profile, Notification Profile, Tags, and Monitor Group for multiple monitors and automate the configuration settings of your monitoring resources.

How to add a Configuration Rule

Related links:

How to add an Azure monitor.
How to integrate an Azure App Service monitor.
How to integrate Azure Virtual Machine monitor.
How to configure IT Automations for a monitor.
View the list of monitor reports.

Was this document helpful?

Would you like to help us improve our documents? Tell us what you think we could do better.


We're sorry to hear that you're not satisfied with the document. We'd love to learn what we could do to improve the experience.


Thanks for taking the time to share your feedback. We'll use your feedback to improve our online help resources.

Shortlink has been copied!