How to monitor the Enterprise Router (ER) in Huawei Cloud
Site24x7 continuously monitors your Enterprise Router (ER) metrics, giving your team real-time visibility into instance-level traffic throughput, packet delivery rates, and drop events across both router instances and individual attachments.
Use cases
Routing resilience: Spikes in Drops indicate that traffic is being discarded due to missing or misconfigured routes. Alerting on these counters helps your team resolve routing gaps before entire application segments lose connectivity.
Attachment-level visibility: Tracking Attachment Traffic lets your team pinpoint which VPC, VPN, or direct link is overloaded. Rebalancing or resizing attachments helps prevent the router from becoming a bottleneck.
Capacity assurance: Inbound and Outbound Bit Rates give a continuous view of router utilization against provisioned capacity. Setting thresholds helps trigger proactive scaling before throughput limits degrade inter-VPC latency.
Setup and configuration
Enterprise Router resources are auto-discovered and monitored during the Huawei Cloud integration. To enable monitoring, follow the steps below:
- Navigate to Cloud > Huawei > Add Huawei Monitor. Follow these steps to add a Huawei Cloud monitor.
- While adding or editing a Huawei Cloud monitor, select ER from the Service/Resource Types drop-down and click Save.
- Navigate to Cloud > Huawei, select the created Huawei monitor, and then click Enterprise Router.
Supported metrics
Traffic
|
Metric name |
Description |
Units |
|---|---|---|
| Instance Inbound Bytes | Total bytes received by the Enterprise Router (ER) instance across all attachments in the monitoring period. | Byte |
| Instance Outbound Bytes | Total bytes transmitted by the ER instance across all attachments in the monitoring period. | Byte |
| Attachment Inbound Bytes | Total bytes received through a specific attachment connected to the ER. | Byte |
| Attachment Outbound Bytes | Total bytes transmitted through a specific attachment connected to the ER. | Byte |
Network
|
Metric name |
Description |
Units |
|---|---|---|
| Instance Inbound Bits Rate | Rate of bits received by the ER instance per second, reflecting overall ingress throughput. | Bit/second |
| Instance Outbound Bits Rate | Rate of bits transmitted by the ER instance per second, reflecting overall egress throughput. | Bit/second |
| Instance Inbound Packets | Total number of packets received by the ER instance in the monitoring period. | Count |
| Instance Outbound Packets | Total number of packets transmitted by the ER instance in the monitoring period. | Count |
| Attachment Inbound Bits Rate | Rate of bits received through a specific attachment per second. | Bit/second |
| Attachment Outbound Bits Rate | Rate of bits transmitted through a specific attachment per second. | Bit/second |
| Attachment Inbound Packets | Total packets received through a specific attachment in the monitoring period. | Packet/second |
| Attachment Outbound Packets | Total packets transmitted through a specific attachment in the monitoring period. | Packet/second |
Drops
|
Metric name |
Description |
Units |
|---|---|---|
| Instance Blackhole Dropped Packets | Number of packets dropped at the instance level because they matched a blackhole route entry. | Count |
| Instance No-Route Dropped Packets | Number of packets dropped at the instance level because no matching route was found in the routing table. | Count |
Attachment Traffic
|
Metric name |
Description |
Units |
|---|---|---|
| Attachment Inbound Bytes | Total bytes received through a specific attachment in the monitoring interval, providing per-attachment ingress volume. | Byte |
| Attachment Outbound Bytes | Total bytes transmitted through a specific attachment in the monitoring interval, providing per-attachment egress volume. | Byte |
Attachment Network
|
Metric name |
Description |
Units |
|---|---|---|
| Attachment Inbound Bits Rate | Rate of bits per second received through a specific attachment, reflecting real-time ingress load on that connection. | Bit/second |
| Attachment Outbound Bits Rate | Rate of bits per second transmitted through a specific attachment, reflecting real-time egress load on that connection. | Bit/second |
| Attachment Inbound Packets | Total packets received through a specific attachment, useful for comparing packet counts against byte volumes. | Count |
| Attachment Outbound Packets | Total packets transmitted through a specific attachment in the monitoring period. | Count |
Attachment Drops
|
Metric name |
Description |
Units |
|---|---|---|
| Attachment Blackhole Dropped Packets | Number of packets dropped on a specific attachment because they matched a blackhole route. | Count |
| Attachment No-Route Dropped Packets | Number of packets dropped on a specific attachment because no route was available to forward them. | Count |
Dependency View
The Dependency View tab maps GeminiDB Cassandra groups based on your customer requirements. Contact support and share your requirements to help us prioritize dependency mapping for the GaussDB Cassandra groups in your account.
Common monitored data
Outages
The Outages tab displays outage details, including start time, end time, duration, and related comments, to help track and review downtime events.
Notes
The Notes tab enables you to record descriptions, operational context, runbook steps, recent changes, and reference links to keep your team informed. Format the content using markdown syntax.
Log Report
The Log Report tab provides a unified view of the respective monitor's log status and supports CSV downloads for analysis and auditing.
Alert Logs
The Alert Logs tab provides a comprehensive list of all alerts generated by the monitor. Easily track key details such as the monitored resource name, alert trigger time, root cause, and notification status. Learn more.
Threshold configuration
You can configure thresholds and alerts for all ER metrics to proactively detect performance degradation and connection issues.
Go to Admin > Configuration Profiles > Threshold and Availability to create or modify your alert profiles.
IT Automation
Use Site24x7's IT Automation to resolve common issues with ER performance automatically:
- Go to Admin > IT Automation Templates. Then, click Add Automation Templates.
- Create an automation rule by selecting the automation Type (e.g., Server reboot, clear queue).
- Map the created rules to the ER monitor for automatic execution during alerts.
Configuration rules
Use Configuration Rules to simplify bulk setup across ER instances. Automatically assign Threshold Profiles, Notification Profiles, Tags, and Monitor Groups when new monitors are discovered.
